MALLINCKRODT INC. SCIENCE PRODUCTS DIVISION -- GLYCEROL -- 6810-00-264-6637
=====================  Product Identification  =====================

Product ID:GLYCEROL
MSDS Date:03/13/1990
FSC:6810
NIIN:00-264-6637
=== Responsible Party ===
Company Name:MALLINCKRODT INC. SCIENCE PRODUCTS DIVISION
Address:PARIS BYPASS
Box:M
City:PARIS
State:KY
ZIP:40361
Country:US
Info Phone Num:800-354-2050(PRESS 3)/314-539-1600
Emergency Phone Num:800-354-2050/314-982-5000
CAGE:62910
=== Contractor Identification ===
Company Name:MALLINCKRODT SPECIALTY CHEMICALS CO
Address:222 RED SCHOOL LANE
Box:City:PHILLIPSBURG
State:NJ
ZIP:08865
Country:US
Phone:908-859-2151
CAGE:62910

=============  Composition/Information on Ingredients  =============

Ingred Name:GLYCERIN  (GLYCEROL)
CAS:56-81-5
RTECS #:MA8050000
Fraction by Wt: 100%
Other REC Limits:NONE SPECIFIED BY M.
OSHA PEL:15 MG/M3 (MIST)
ACGIH TLV:10 MG/M3 (MIST) 9394

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:ORAL LD50 (RAT) IS 12,600 MG/KG
Routes of Entry: Inhalation:YES  Skin:NO  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:ACUTE-INHALATION:IRRITATION OF NASAL
    AND REPIRATORY SYSTEM. EYES/SKIN:IRRITATION.
    INGESTION:GASTROINTESTINAL IRRITATION. CHRONIC:CNS EFFECTS, LIVER
    AND KIDNEY DAMAGE.
Effects of Overexposure:EYE/SKIN:IRRITATION. INHALATION:NASAL AND
    RESPIRATORY IRRITATION, COUGHING. INGESTION:NAUSEA, VOMITING &
    DIARRHEA.
Medical Cond Aggravated by Exposure:PRE-EXISTING SKIN, KIDNEY AND LIVER
    DISORDERS MAY BE AGGRAVATED BY OVEREXPOSURE.

=======================  First Aid Measures  =======================

First Aid:SKIN:WASH AREA WITH SOAP AND WATER. REMOVE CONTAMINATED
    CLOTHING. EYES: FLUSH WITH LARGE AMOUNTS OF WATER FOR 15 MINUTES.
    SEE DOCTOR. INGESTION:GIVE 1-2 GLASSES OF WATER IF CONSCIOUS,
    INDUCE VOMITING.  GET IMMEDIATE MEDICAL ATTENTION.
    INHALATION:REMOVE TO FRESH AIR, GIVE OXYGEN IF NEEDED, IF BREATHING
    STOPS, RESUSCITATE.

=====================  Fire Fighting Measures  =====================

Flash Point Method:CC
Flash Point:320F,160C
Autoignition Temp:Autoignition Temp Text:400C
Lower Limits:0.9 %
Extinguishing Media:WATER FOG, CARBON DIOXIDE OR DRY CHEMICAL.
Fire Fighting Procedures:WEAR FULL PROTECTIVE GEAR AND SELF-CONTAINED
    BREATHING APPARATUS.WATER SPRAY OR FOG WILL HELP TO REDUCE FUMES
    AND IRRITATING GASES.
Unusual Fire/Explosion Hazard:VAPOR-AIR MIXTURE ARE EXPLOSIVE ABOVE
    FLASH POINT.

==================  Accidental Release Measures  ==================

Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION. RECOVER LIQUID
    BY VACUUMING, OR ABSORB LIQUID ON VERMICULITE OR OTHER INERT
    ABSORBENT MATERIAL AND TRANSFER TO CONTAINER FOR DISPOSAL.
Neutralizing Agent:NONE

======================	Handling and Storage  ======================

Handling and Storage Precautions:STORE IN A CLEAN, DRY, WELL VENTILATED
    AREA. STORE AWAY FROM IGNITION SOURCES.
Other Precautions:KEEP OUT OF REACH OF CHILDREN.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NONE NORMALLY REQUIRED. USE NIOSH APPROVED
    RESPIRATOR IF TLV/PEL EXCEEDED.
Ventilation:USE ADEQUATE MECHANICAL VENTILATION.
Protective Gloves:NITRILE RUBBER
Eye Protection:SAFETY GLASSES.
Other Protective Equipment:WEAR IMPERVIOUS CLOTHING TO PREVENT
    PROLONGED OR REPEATED CONTACT.
Work Hygienic Practices:PRACTICE GOOD PERSONAL HYGENE. DO NOT EAT,
    DRINK, SMOKE UNTIL HANDS ARE WASHED.
Supplemental Safety and Health
MSDS FROM MFR DATED 03 NOV,85 CONFORMS TO OSHA HAZ COMM STD.

==================  Physical/Chemical Properties  ==================

HCC:N1
Boiling Pt:B.P. Text:554F,290C
Melt/Freeze Pt:M.P/F.P Text:64.4F,18.0C
Vapor Pres:<.1
Vapor Density:3.17
Spec Gravity:1.25
Evaporation Rate & Reference:<1.0 (N-BUTYL ACETATE=1)
Solubility in Water:MISCIBLE
Appearance and Odor:COLORLESS, OILY LIQUID, ODORLESS.
Percent Volatiles by Volume:100

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS AND STRONG ALKALIS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:CARBON MONOXIDE AND CARBON DIOXIDE.,
    AND OTHER CORROSIVE GASES.

====================  Disposal Considerations  ====================

Waste Disposal Methods:INCINERATE OR DISPOSE OF IN ACCORDANCE WITH
    LOCAL, STATE AND FEDERAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.