OREGON RESEARCH & DEV CORP -- ELASTO SEAL  -- 8030-00N047893
<pre>=====================  Product Identification  =====================

Product ID:ELASTO SEAL
MSDS Date:07/10/1991
FSC:8030
NIIN:00N047893
=== Responsible Party ===
Company Name:OREGON RESEARCH & DEV CORP
Address:1895 16TH ST SE
City:SALEM
State:OR
ZIP:97302-1436
Country:US
Info Phone Num:800-345-0809
Emergency Phone Num:800-345-0809
CAGE:1Y094
=== Contractor Identification ===
Company Name:OREGON RESEARCH & DEV CORP
Address:1895 16TH ST SE
Box:City:SALEM
State:OR
ZIP:97302-1436
Country:US
Phone:800-345-0809
CAGE:1Y094

=============  Composition/Information on Ingredients  =============

Ingred Name:PIGMENTS
OSHA PEL:N/K 
ACGIH TLV:N/K 

Ingred Name:ACRYLIC LATEX; (SOPHISTICATED ACRYLIC LATEX)
OSHA PEL:N/K 
ACGIH TLV:N/K 

Ingred Name:SOLVENTS; (SOLVENTS (WATER))
OSHA PEL:N/K 
ACGIH TLV:N/K 

Ingred Name:INERT INGREDIENTS; (MISCELLANEOUS INERT INGREDIENTS)
OSHA PEL:N/K 
ACGIH TLV:N/K 

Ingred Name:AMMONIA (MIXTURE W/ING 6)
CAS:7664-41-7
RTECS #:BO0875000
Fraction by Wt: <1%
OSHA PEL:N/K 
ACGIH TLV:N/K 
EPA Rpt Qty:100 LBS
DOT Rpt Qty:100 LBS

Ingred Name:AMMONIUM HYDROXIDE; (AMMONIA HYDROXIDE)  (SARA III)
CAS:1336-21-6
RTECS #:BQ9625000
OSHA PEL:N/K 
ACGIH TLV:N/K 
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:NO
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:CONTAINS SOME AMMONIA FOR PH CONTROL.
    MIST OR LIQUID MAY IRRITATE OR BURN EYES, SKIN AND MUCOUS MEMBRANE.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

=======================  First Aid Measures  =======================

First Aid:INGESTION: CALL MD IMMEDIATELY . EYES: FLUSH EYES WITH WATER
    FOR AT LEAST 30 MINUTES IF IRRITATION OCCURS. SEEK MEDICAL
    ATTENTION AS NEEDED. SKIN: FLUSH SKIN WITH WATER FOR AT LEAST 30
    MINUTES I F IRRITATION OCCURS. REMOVE CONTAMINATED CLOTHING. SEEK
    MEDICAL ATTENTION AS NEEDED. INHALATION: SEEK VENTILATION AND FRESH
    AIR AS NEEDED.

=====================  Fire Fighting Measures  =====================

Extinguishing Media:MEDIA SUITABLE FOR SURROUNDING FIRE .
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA AND FULL
    PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NOT APPLICABLE.

==================  Accidental Release Measures  ==================

Spill Release Procedures:SINCE SOME PERSONS MIGHT BE SKIN SENSITIVE,
    GLOVES ARE RECOMMENDED. USE ABSORBENT MATERIAL AND PLACE IN
    APPROVED CONTAINER AND BURY IN APPROVED LANDFILL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:BEST STORED BETWEEN 40-80F. DO NOT
    FREEZE!
Other Precautions:NOT APPLICABLE.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:IF SPRAYED, RECOMMEND NIOSH/MSHA APPROVED
    RESPIRATOR FILTER MASK SUITABLE FOR SPRAY PAINTING.
Ventilation:PROVIDE PROPER LOCAL EXHAUST VENTILATION AS NEEDED.
    MECHANICAL VENTILATION ACCEPTABLE.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPVD CHEM WORK GOGG .
Other Protective Equipment:WEAR PROTECTIVE CLOTHING AS NEEDED. AN ANSI
    APPROVED EYEWASH AND SAFETY SHOWER SHOULD BE NEARBY AND READY FOR
    USE 
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:212F,100C
Vapor Pres:17.5
Spec Gravity:1.15 (H*2O=1)
Evaporation Rate &amp; Reference:0.83-1 (BUTYL ACETATE=1)
Solubility in Water:DILUTABLE
Appearance and Odor:THICK BLACK WATERBASED ELASTIC COATING. CONTAINS NO
    PETRO. SLIGHT AMMONIA ODOR.

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
NONE.
Stability Condition to Avoid:NONE.
Hazardous Decomposition Products:THERMAL DECOMPOSITION MAY PRODUCE
    CARBON MONOXIDE AND/OR CARBON DIOXIDE.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSAL MUST BE IN ACCORDANCE WITH FEDERAL,
    STATE AND LOCAL REGULATIONS . COLLECT AND BURY IN LANDFILL OR WASH
    INTO SEWAGE TREATMENT PLANT IN SMALL QUANTITIES. FOR LARGE
    QUANTITIES, CONTACT EPA  OR MANUFACTURER.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.